In the previous guide (here), we took a look at the STM32G070 features and we were able to blink and LED using HAL. In this guide, we shall toggle the LED using pushbutton connected to out STM32G070. In this guide, we shall cover the following ...
READ MOREIn the pervious guide (here), we have successfully integrated LCD. In part 3, we shall integrate the touch part of the LCD. 10. Touch Connection: The connection of Touch pins as following: ILI9341 STM32F767Zi Nucleo-144 T_CLK PB13 T_CS PA3 T_DIN...
READ MOREIn the previous guide (here), we took a look at LvGL and its feature and initialized the environment to make it work. In part two, we shall interface the TFT and display the demo. 6. Including LvGL into the project: First, head to LvGL github...
READ MOREIn this new guide series, we shall take a look at LvGL and develop driver to display LvGL and touch control. In this guide, we shall cover the following: What is LvGL. Required hardware. TFT connection. Environment setup. Essential drivers. 1...
READ MOREIn this guide, we shall take a look at what is random number and how the STM32 uses hardware to generate true random numbers and develop the code for that. In this guide, we shall cover the following: What is random number. How STM32 generate...
READ MOREIn this guide, we shall send data over SPI bus using DMA. In the previous guide (here), we discussed how to send a single character using SPI in polling mode. This method will decrease the CPU performance since the CPU has to wait for each time...
READ MOREIn the previous guide (here), we initialized the peripheral and filter to accept data with identifier of 0x446. In this third part of CANBus guide, we shall start to transmit data from one STM32 and receive it from another STM32. (From STM32Ff407...
READ MOREIn part of the this guide series (here), we took a look at CANBus and it features, CANBus peripheral of STM32F446 and its feature. In part two, we shall initialize the CANBus pins, CANBus and the filter to accept data with fixed identifier. In...
READ MOREIn this new guide series, we shall take a look at CANBus, brief history, message format of the CANbus and its feature within STM32F446. Int this guide, we shall cover the following: What is CANBus and its feature. Type of CANBus Message format of...
READ MOREIn this revised version of SPI TX with DMA, we shall see how to transmit data over SPI using DMA. In the previous guide (here), we discussed how to send a single character using SPI in polling mode. This method will decrease the CPU performance...
READ MOREIn the previous version of WS2812 Addressable LED, we used PWM with DMA to send the data to the addressable LED. In this guide, we shall use SPI to send the data. In this guide, we shall cover the following: Timing Calculation. Change Core...
READ MOREIn the third part of external loader, we shall develop the external loader and test it. In this guide, we shall cover the following: Getting the required files. Modify the file. Building the external loader. Testing the external loader. Project...
READ MOREAll Rights Reserved