In this guide, we shall see what is Board Support package and how to build one for STM32F411-Nucleo64. In this guide, we shall see how to configure the GPIO input mode and output. In this guide, we shall cover the following: What is BSP. Building...
READ MOREIn the previous guide (here), we took a look how to control the LED brightness using sliders. In this guide, we shall see how to plot some graphs using nextion display and STM32. In this guide, we shall cover the following: Nextion Display setup...
READ MORECharacter display LCD ares used in so many products we used daily. We can find them in Espresso machines, 3D printers, microwaves and printers and many other products. In this lesson we going to lean how to interface LCD’s to our...
READ MOREThe TCRT500 module is a reflective sensor module. It is made up of a phototransistor coupled with an infrared LED. It’s working principle is that, the infrared LED will illuminate and bounce its light off a surface at an angle which will...
READ MOREAll Rights Reserved