In the previous guide, we took a look at the NEC IR protocol and setup STM32 to run at 64MHz. In this guide, we shall setup some required peripheral. In this guide, we shall cover the following: Hardware setup. I2C and OLED setup. Output Compare...
READ MOREIn the previous guide (here), we took a look how to control the LED brightness using sliders. In this guide, we shall see how to plot some graphs using nextion display and STM32. In this guide, we shall cover the following: Nextion Display setup...
READ MOREIn the previous guide (here), we took a look how to control two LED using touch toggle switches. In this guide, we shall see how to control LEDs brightness using sliders. In this guide, we shall cover the following: LED PWM driver code. Nextion...
READ MOREIn the previous guide (here), we saw how to how to send strings from STM32 to Nextion display. In this guide, we shall see how to control two LEDs using Nextion display. In this guide, we shall cover the following: LED control code. Nextion...
READ MOREIn the previous guide (here), we saw how to setup Nextion editor and STM32F4 to work with Nextion display. In this guide, we shall see how to send some strings from STM32 to Nextion display. In this guide, we will cover the following: Nextion...
READ MOREIn this guide, we shall see how to work with Nextion display with STM32. In this part of guide, we shall cover the following: What is nextion display. Nextion editor Setup. STM32 setup. 1. What is Nextion Display: Nextion is a Seamless Human...
READ MOREIn the previous guide (here), the usage of Liquid Crystal Display with I2C is presented, in this guide, the usage of custom character capability of the LCD shall be discussed. The following will be covered: Custom Character of LCD. Code. Demo. 1...
READ MOREIn the previous guide (here), we saw how to configure timer to work in encoder mode. In this guide, we shall take it step further and measure the rotational speed in RPM (Revolutions per Minutes). In this guide, we shall cover the following: How...
READ MOREIn this guide, we shall use STM32 to acquire data from BMP180 temperature and pressure sensor and display the results on OLED display. In this guide, we shall cover the following: BMP180 Sensor. Connection with STM32. Code. Results. 1.1 BMP180...
READ MOREIn this guide, we shall see how to configure the timer to work as input capture mode. In this guide we shall cover the following: Input Capture Mode. Connection. Code. Results. 1. Input Capture Mode: As we’ve discussed in an earlier tutorial, the...
READ MOREIn this guide, we shall interface STM32 with GLCD12864 using serial method. We shall display some texts, shapes and graphics. In the guide, we will cover the following: GLCD 12864. Interface with STM32. Code. Demo. 1. GLCD 12864: Ordinary LCDs...
READ MOREIn this article, we will took at the RFID and how it does work and use RC522 to read RFID tag and display the tag ID on I2C LCD. In this article, we will cover the following: What is RFID. RC522 RFID module. Connection with STM32. Code. Demo. 1...
READ MOREAll Rights Reserved