In the previous guide (here), we took a look how to configure the timer to generate PWM signal and update the duty cycle in software. In this guide, we shall configure the time with PWM to update the duty cycle using DMA. In this guide, we shall...
READ MOREIn the previous guide (here), we tool a look for SPI in duplex mode using polling mode. In this guide, we shall see how to do SPI Full duplex using DMA. In this guide, we shall cover the following: Enable RXDMA for SPI. Configure DMA. SPI RX with...
READ MOREIn the previous guide (here), we took a look at keypad structure and how to initialize the keypad pins. In this guide, we shall develop the algorithm to read from keypad. In this guide, we shall cover the following: Read keypad function. Code...
READ MOREIn this two part guide, we shall see how to interface 4×4 Keypad with STM32F411RE-Nucleo and develop the algorithm required to read the keypad. In this guide, we shall cover the following: Key structure. Reading keypad. Keypad pinout...
READ MOREIn the past guides related to SPI, we worked only with single slave device. In this guide, we shall cover dealing with multiple slave devices. The slave devices in this case are: MPU9250. SSD1306 SPI OLED Monochrom display. In this guide, we...
READ MOREIn the previous guide (here), we saw how to transfer data over SPI using DMA. In this guide, we shall see how to receive data from SPI bus. In this guide, we shall cover the following: SPI Receive function. MPU9250 connection. Code. Results. 1...
READ MOREIn the previous guide (here), we saw how to transmit data over SPI using polling mode. In this guide, we shall use DMA to transmit data over SPI without CPU intervention. In this guide, we shall cover the following: Configure SPI in DMA TX mode...
READ MOREAll Rights Reserved