In this guide on Micropython on STM32F411RE Nucleo-64, we shall see how to develop PWM driver to control various systems like LEDs DC motors etc. In this guide, we shall cover the following: 1. What is PWM: Pulse-width modulation (PWM), also...
READ MOREIn part 2 of LIN guide, we shall start transmitting data over LIN bus and decode them using either oscilloscope or logic analyzer. In this guide, we shall cover the following: 3. Creating Source and Header Files: After the project has been...
READ MOREIn this guide, we shall take a look at the I2C bus and how to configure the i2c of STM32H5 using STM32CubeMX. In this guide, we shall cover the following: 1. I2C Protocol: I2C or Inter Integrated Circuit is type of synchronous serial...
READ MOREIn this multiple-part guide series on LIN (Local Interconnect Network) bus for STM32F4, I will cover its fundamentals and implementation. Part one will introduce the LIN bus and focus on the initial serial setup for communication. In this guid...
READ MOREIn this guide, we shall see how to use micropython to read analog signal applied to analog pin of STM32F411 Nucleo-64. In this guide, we shall cover the following: 1. What is ADC: In electronics, an analog-to-digital...
READ MOREIn this guide, we shall see how configure a GPIO as input and read the GPIO pin state and toggle the LED with each press from the push button. In this guide, we shall cover the following: 1. Gathering the Information: From the user manual of...
READ MOREAfter we have learnt how to compile and flash the board with micropython, in this guide, we shall use micropython to control on the board LED. This guide shall cover the basic of GPIO control in output mode. In this guide, we shall cover the...
READ MOREIn this guide, we shall see how to compile the micropython core for STM32F411 Nucleo-64 and burn the compiled version to the board. In this guide, we shall cover the following: 1. Compiling the Micropython: Note: Here we are assume that your...
READ MOREIn the second part of the ST7920 GLCD guide, we shall start the initialization sequence and display some strings and display pictures. In this guide, we shall cover the following: 5. Creating Source and Header File: After the project has been...
READ MOREIn this guide, we shall see what is rotary encoder and how to use timer of the STM32H5 to read the pulses using hardware which will relief the MCU from processing the pulses of the encoder. In this guide, we shall cover the following: 1. What is...
READ MOREThe ST7920-based 128×64 GLCD is a versatile graphical display commonly used in embedded systems for visualizing text and graphics. When interfaced with an STM32F4 using SPI, it enables efficient communication while minimizing pin usage. This...
READ MOREIn this guide, we shall use DMA to transmit data over SPI bus to relief the CPU and make it free to do something else. In this guide, we shall cover the following: 1. Why to Use DMA with SPI: Using DMA with SPI in STM32 is highly...
READ MOREAll Rights Reserved