Getting Started with BLE on the STM32WB55: Part 1
In Part 1 of our BLE application development series for the STM32WB55! In this guide, we will explore the key features of the STM32WB55,…
GPIO
Digital pin input, output, alternate functions or atomic pin writes.
31 articles
Articles
Getting Started with STM32 Low Layer (LL): GPIO Input
Transition from driving outputs to interpreting the physical world by configuring the STM32F4’s GPIO pins as digital inputs using Low Layer (LL) drivers. This…
Getting Started with STM32 Low Layer (LL): Blinking an LED
Master the balance between hardware control and code efficiency by leveraging the STM32F4’s Low Layer (LL) drivers for direct register access. This introductory guide…
Using Micropython for STM32F411: Blink Without Delay
In this guide, we shall use MicroPython on the STM32F411 Nucleo board to blink two LEDs connected to PA0 and PA1. The LEDs will…
Using Micropython for STM32F411: GPIO Input
In this guide, we shall see how configure a GPIO as input and read the GPIO pin state and toggle the LED with each…
Using Micropython for STM32F411: Blinking LED
After we have learnt how to compile and flash the board with micropython, in this guide, we shall use micropython to control on the…
Getting Started with STM32H5 ARM Cortex M33: GPIO Input
In this guide on STM32H5 series, we shall see how to configure the GPIO as input, read the state of the pin and reflect…
Getting Started with STM32H5 ARM Cortex M33: Blinking LED
In this series guide of STM32H5, we shall see how to develop drivers using STM32CubeMX for STM32H563ZI Nucleo-144. In this guide, we shall cover…
Getting Started with STM32WB55: GPIO Input
In the previous guide (here), we took a look at how to configure the pin as output. In this guide, we shall configure pins…
Getting Started with STM32WB55: Blinking LED
In this guide series, we shall see how to work with STM32WB55 and blink the on boards LEDs and later, we shall build BLE…