Getting Started with STM32G0 and STM32CubeIDE : GPIO Input
In the previous guide (here), we took a look at the STM32G070 features and we were able to blink and LED using HAL. In…
Digital pin input, output, alternate functions or atomic pin writes.
31 articles · Page 2 of 4
In the previous guide (here), we took a look at the STM32G070 features and we were able to blink and LED using HAL. In…
In this series of guide, we shall use STM32CubeIDE with STM32CubeMX integration with IDE to drive the peripheral of the STM32G070. In this guide,…
In the second section of part 2 of parallel port emulation, we shall see how to read the data being transmitted and display the…
In the previous guide (here), we took a look at what is parallel port and successfully send byte of data using timer and DMA.…
In this guide, we shall emulate the parallel output that had been used before to communicate with printers which eventually replaced with serial port…
In the previous part of this guide (here), we took a look at how to configure the SysTick to generate ticks for the system…
In this guide, we shall see what is Board Support package and how to build one for STM32F411-Nucleo64. In this guide, we shall see…
In the previous guide (here), we took a look at keypad structure and how to initialize the keypad pins. In this guide, we shall…
In this two part guide, we shall see how to interface 4×4 Keypad with STM32F411RE-Nucleo and develop the algorithm required to read the keypad.…
In this guide, we shall use DMA to toggle LED with a help of a timer to achieve the toggle rate of 1Hz. In…