Working with STM32 and Motors: DC Servo Motors
In this guide series, we shall see how to use STM32 to control various types of motors. The first type of motor is servo…
Year: 2024
95 articles · Page 9 of 10
Articles
Getting Started with STM32G0 and STM32CubeIDE: UART Full Duplex DMA
In the previous guide (here), we took a look how to receive data over UART using interrupt. Now, we shall see how to send…
Getting Started with STM32G0 and STM32CubeIDE: UART Interrupt Receiver
In the previous guide (here), we took a look at the UART and we were able to configure the STM32G070 to transmit data. Now,…
Working with STM32F7 and SPI: Full Duplex Communication
In the pervious guide (here), we saw how to send data over SPI using DMA. In this guide, we shall communicate with slave device…
[Revised]Working with STM32 and sensors: DHT11
In this article, we shall look at the dth11 temperature and humidity sensor and how does it work and interface it with STM32F4 Nucleo-64…
Working with STM32 and Timers: Counting external clock
In this guide, we shall use external clock mode of timer in STM32 to count the external events and toggle the LED. (2 presses…
Getting Started with STM32G0 and STM32CubeIDE: UART Transmit
In this guide, we shall take a look at the UART protocol and how to setup UART using STM32CubeMX. In this guide, we shall…
Getting Started with STM32G0 and STM32CubeIDE : GPIO Input
In the previous guide (here), we took a look at the STM32G070 features and we were able to blink and LED using HAL. In…
Getting Started with STM32G0 and STM32CubeIDE: Blinking LED
In this series of guide, we shall use STM32CubeIDE with STM32CubeMX integration with IDE to drive the peripheral of the STM32G070. In this guide,…
Getting Started with LvGL Part 3: Touch Integration
In the pervious guide (here), we have successfully integrated LCD. In part 3, we shall integrate the touch part of the LCD. 10. Touch…