Creating a Library for PCF8591 AD/DA module Part 1: Getting the Required Information
In this two part series guide on how to create a library for PCF8591 AD/DA (Analog to Digital/ Digital to Analog) that can be…
Year: 2024
95 articles
Articles
Getting Started with STM32H5 ARM Cortex M33: Timer Interrupt
In this guide, we shall use timer to generate interrupt for precise time control for our application. In this guide, we shall cover the…
Getting Started with STM32H5 ARM Cortex M33: Timer in PWM Mode with DMA
In this guide, we shall use the DMA to update the duty cycle of the PWM to generate custom waveform like sinewave etc and…
How to Create Library for SPI Sensor Part 2: Creating the library
In the second part of creating a library for SPI sensor, we shall construct the source and header file to interface the sensor with…
Getting Started with STM32H5 ARM Cortex M33: Timer in Output Compare Mode
In the second part of timer series on STM32H5, we shall use timer in output compare to blink the LED using hardware level rather…
Getting Started with STM32H5 ARM Cortex M33: Timer in PWM Mode
In the first part of timer series on STM32H5, we shall use the timer to generate PWM signal to control the brightness of the…
How to Create Library for SPI Sensor Part 1: Getting the Required information
In this guide series, we shall see how to create library for SPI sensor based to acquire data from MPU9250. In part 1, we…
Getting Started with STM32H5 ARM Cortex M33: DAC with DMA and Timer
In the previous guide (here), we took a look how to configure DAC and we used polling mode to generate waveform using the DAC.…
Getting Started with STM32H5 ARM Cortex M33: DAC in Polling Mode
In this guide on DAC (Digital to Analog Converter), we shall see the feature of the DAC on STM32H5, the functional block diagram and…
How to Create a Library for sensors Part 3: Adding Interrupt capability
In the third part of creating a library for ADXL345, we shall study the interrupt capabilities of ADXl345 and improve the driver to utilitize…