Interfacing BMP180 with STM32 Part 2 : Firmware Development
In Part 2, we dive into the core firmware development by establishing $I^2C$ communication to read the factory-calibrated coefficients and raw data from the BMP180 sensor.…
Pressure sensors
Measuring pressure with a sensor.
4 articles
Articles
Interfacing BMP180 with STM32 Part 1 : Introduction and Setup
Mastering the BMP180 begins with establishing a robust communication bridge between the STM32 and your development environment. By prioritizing the configuration of UART and…
Working with STM32 and pressure sensors: HK1100C
In this guide, we shall interface HK1100C pressure sensor with STM32 and able to measure the pressure from 0 up to 1.2MPa. In this…
Working with STM32 and Sensors: BMP180 pressure and temperature sensor
In this guide, we shall use STM32 to acquire data from BMP180 temperature and pressure sensor and display the results on OLED display. In…