Using Micropython for STM32F411: SPI Full Duplex
This guide explains how to perform SPI communication using MicroPython on an STM32F4 microcontroller. It covers initializing the SPI interface, controlling a chip select…
MicroPython
Building, flashing or programming with MicroPython.
12 articles
Articles
Using Micropython for STM32F411: SPI Transmit
This guide demonstrates how to use SPI communication on an STM32F4 microcontroller with MicroPython. It shows how to transmit 5 bytes of data repeatedly…
Using Micropython for STM32F411: I2C Write
In this small and quick guide, we demonstrate how to perform I2C write operations using MicroPython to update register values on a connected device.…
Using Micropython for STM32F411: I2C Read
I2C (Inter-Integrated Circuit) is a widely used communication protocol that allows microcontrollers to interface with various peripheral devices using just two wires. In this…
Using Micropython for STM32F411: Blink Without Delay
In this guide, we shall use MicroPython on the STM32F411 Nucleo board to blink two LEDs connected to PA0 and PA1. The LEDs will…
Using Micropython for STM32F411: Timer in Interrupt Mode
In this guide, we will explore how to use MicroPython on the STM32F411 Nucleo board for embedded development. We will specifically focus on configuring…
Using Micropython for STM32F411: Timer in Output Compare Mode
In this guide, we shall see how output compare mode works and develop a driver that will toggle the LED using hardware. In this…
Using Micropython for STM32F411: PWM Output
In this guide on Micropython on STM32F411RE Nucleo-64, we shall see how to develop PWM driver to control various systems like LEDs DC motors…
Using Micropython for STM32F411: Analog Read
In this guide, we shall see how to use micropython to read analog signal applied to analog pin of STM32F411 Nucleo-64. In this guide,…
Using Micropython for STM32F411: GPIO Input
In this guide, we shall see how configure a GPIO as input and read the GPIO pin state and toggle the LED with each…