Working with ADC and STM32 part 6: Timer triggered with DMA with Double Buffer
In the previous guide (here), we saw how to configure the ADC with DMA and timer to trigger it periodically. In this guide, we…
Register-level programming
Direct peripheral-register programming; not inferred just from register descriptions.
237 articles · Page 7 of 24
Articles
Getting Started with STM32F103: SPI Full Duplex using DMA
In the previous guide (here), we took a look how to transmit data over SPI bus using DMA. In this guide, we shall use…
Working with STM32 and HM10 BLE Part 2: Full Duplex Communication
In the previous guid (here), we took a look at HM-10 module and how to connect it to STM32F4. In this guide, we shall…
Working with STM32 and HM10 BLE Part 1: Environment and connection setup
In this two part series guide, we shall interface HM10 BLE module with STM32 and control an LED and send string from STM32. In…
Working with STM32 and HC12 Part 2: LED Control
In the previous guide (here), we took a look at HC-12 RF module and setup the environment in STM32CubeIDE. In this guide, we shall…
Working with STM32 and HC12 Part 1: Environment Setup
In this guide, we shall take a look at HC-12 RF long range RF communication module. In this guide, we shall cover the following:…
Getting started with STM32L053: PWM Update with DMA
In the previous guide (here), we took a look how to configure the timer to generate PWM signal and update the duty cycle in…
Getting started with STM32L053: SPI Full Duplex using DMA
In the previous guide (here), we tool a look for SPI in duplex mode using polling mode. In this guide, we shall see how…
Working with STM32 and keypad Part 2: Reading keypad
In the previous guide (here), we took a look at keypad structure and how to initialize the keypad pins. In this guide, we shall…
Working with STM32 and keypad Part 1: Interface
In this two part guide, we shall see how to interface 4×4 Keypad with STM32F411RE-Nucleo and develop the algorithm required to read the keypad.…