All articles

521 articles · Page 31 of 53

Articles

DMA19 Aug 2023

In this second section of the thirteenth part of board support package, we shall develop the source code of the DMA driver and test…

2 min read

DMA15 Aug 2023

In this thirteenth part, section 1 of board support package, we shall develop the header for DMA in order to configure it later with…

2 min read

SPI5 Aug 2023

In this twelfth part of Board Support Package, we shall develop the receiver part of SPI to achieve full duplex communication with slave device…

2 min read

SPI3 Aug 2023

In this eleventh part of Board Support Package (BSP), we shall develop SPI driver to send multiple bytes with timeout. In this guide, we…

2 min read

FPU31 Jul 2023

In this tenth part of Board Support Package, we shall enable the FPU (Floating Point Unit) inside the STM32F411 Nucleo-64 to improve the handling…

1 min read

Debugging27 Jul 2023

In this ninth part of board support package (BSP), we shall add the debugging output over Serial Wire Output (SWO) to display different level…

2 min read

UART23 Jul 2023

In this eighth part of Board Support Package, we shall develop interrupt driver for UART2 to receive a single character and toggle an LED…

2 min read

Interrupts20 Jul 2023

In this seventh part of Board Support Package on STM32F411, we shall develop external interrupt driver to interrupt the processor each time the push…

3 min read

UART15 Jul 2023

In the previous guide, we took a look at building BSP for UART in TX mode. Now, we shall develop the BSP for UART…

2 min read

UART11 Jul 2023

In the previous guide (here), we took a look how to configure a pin to work in alternate function. In this guide, we shall…

2 min read