Working with STM32 and NRF24L01 Wireless RF Part2: Sending data
In the previous guide(here), we take a look at NRF24L01 and configured the required peripheral and initialized the module. In this guide, we shall…
Author: Husamuldeen
505 articles · Page 44 of 51
Articles
Working with STM32 and NRF24L01 Wireless RF Part1: Configuration
NRF24L01 is one of the legal RF communicators for modern applications. NRF24L01 is the cheapest one and it comes with great features. A single…
Getting started with STM32L053: GPIO Input
In the previous guide (here), we took a look at GPIO output using STM32L053, now we shall see how to develop GPIO input driver.…
Working with ADC and STM32 part 5: Timer triggered with DMA
In the previous guide (here), we took a look at the ADC in continuous mode with DMA. In that guide, we used the ADC…
Working with STM32 and internal DAC: timer trigger DAC with DMA
In the previous guide, we took a look at the internal DAC of STM32F4 (here) and we where are able to generate sawtooth using…
Investigating BSRR register (Bit Set Reset)
In this guide, we shall investigate why there is BSRR (Bit Set Reset Register) in STM32 to set/reset a specific GPIO pin. In this…
Getting started with STM32L053: Blinking an LED
In this new getting started with STM32L0, we shall use STM32L053 Nucleo-64 and blink onboard LED using only registers and develop the firmware from…
Working with STM32 and Sensors: BMP180 pressure and temperature sensor
In this guide, we shall use STM32 to acquire data from BMP180 temperature and pressure sensor and display the results on OLED display. In…
Working with STM32 and timers: Input Capture Mode.
In this guide, we shall see how to configure the timer to work as input capture mode. In this guide we shall cover the…
Working with STM32 and Sensors: Thermocouple TypeK
In this guide, we shall take a look at the thermocouple and how this type of sensor works and use MAX6675 thermocouple to measure…