Working with STM32F429-discovery Display Part 2: LCD Initializing
In the previous guide (here), we took a look at STM32F429 Discovery and it’s features and the environment has been setup. In this guide,…
Author: Husamuldeen
505 articles · Page 29 of 51
Articles
Working with STM32F429-discovery Display Part 1: Environment Setup
In this multipart guide, we shall focus on the display that embedded on STM32F429 discovery board and develop the driver for the LCD and…
STM32 Advanced Timers Part 2: Dead Time Insertion
In the previous guide (here), we took a look at the advanced control timer and how to generate PWM signal with complementary output. In…
STM32 Advanced Timers Part 1: Generating PWM and Complementary Output
In this guide, we shall take a look at the advanced timer of STM32 and it’s features and how to configure it to generate…
Working with STM32 and AT24C32 EEPROM Part2: Read/Write Multibyte
In part one of this guide series, we took a look at the EEPROM and type of memory. Also we took a look at…
Working with STM32 and AT24C32 EEPROM Part1: Read/Write byte
In this guide, we shall see what is EEPROM and how to interface AT24C32 EEPROM with STM32F4xx. In part1, we shall cover the single…
[Revised]Working with STM32 and Graphics LCD: GLCD 128×64 ST7920
In this revised guide, we shall see how interface GLCD 128×64 with STM32 using SPI method (Serial mode). In this guide, we shall cover…
Input Capture Application Part 2: Measure Frequency and duty cycle using PWM input mode
In this guide, we shall develop driver to measure the frequency and duty cycle of a signal. In this guide, we shall cover the…
Input Capture Application Part 1: Measure the distance from ultrasonic
In part 1 of input capture guides, we shall see how to use input capture to measure the distance from an ultrasonic (HC-SR04) and…
[Revised] Working with STM32 and Sensors: Thermocouple TypeK
In this guide, we shall take a look at the thermocouple and how this type of sensor works and use MAX6675 thermocouple to measure…