Working with STM32 and Motors part 3 : NEMA 17 Stepper Motors
In the previous guide (here), we took a look how to control 28BYJ-48 stepper Motor. In this guide, we shall see how control NEMA17…
STM32F4
Examples explicitly targeting the STM32F4 family.
296 articles · Page 27 of 30
Articles
Working with STM32 and Timers part 6: Output Compare
In the pervious guide (here), we took a look how to configure the timer in encoder mode to read the pulses generated by the…
Working with DMA and STM32: Memory to Memory Mode
In pervious multiple guides, we took look at ADC with DMA (here), USART with DMA (here) and SPI-TX with DMA (here). In this guide,…
Working with STM32 and Motors part 2 : DC Motors
In the pervious guide (here), we took a look at how to control stepper motor. This guide is about DC motor interfacing with STM32F411…
Working with STM32 and Motors part 1 : Stepper Motor
In this guide,, we will learn to interface a stepper motor with STM32F411RE Nucleo-64. There are many options available for stepper motors. But in…
Working with SPI displays and STM32: Driving ST7735
In the pervious guide, we took a look at how to send data over SPI (from here). In this guide, we shall use SPI…
Working with STM32 and ultrasonic: using timer and interrupt to measure the distance
In the previous guide(here), we looked at the operation principle of how ultrasonic works and we used very crude code to measure the distance.…
Working with STM32 and SPI : Send bytes using DMA
In the previous guide (here), we discussed how to send a single character using SPI in polling mode. This method will decrease the CPU…
Working with STM32 and SPI (Serial Peripheral Interface): Send a byte
In this guide, we shall discuss what is SPI and how transmit single byte over SPI. In this guide, we will cover the following:…
Changing core frequency of STM32F411 using registers only
In this guide, we shall use registers to change the core frequency from default 16MHz to 100MHz (maximum for F411RE). We shall use both…