Getting Started with STM32F103: I2C Write Multiple Bytes
In the previous guide (here), we saw how to read three different register from a slave device (DS3231 RTC) and display the time stored…
STM32F1
Examples explicitly targeting the STM32F1 family.
32 articles · Page 2 of 4
Articles
Getting Started with STM32F103: I2C Read Multiple Bytes
In the pervious guid (here), we took a look how to write/read single byte using I2C and the slave device is DS3231 In this…
Getting Started with STM32F103: I2C Read Byte
In the previous guide (here), we took a look how to write a single byte with memory address to a slave device (DS3231) and…
Getting Started with STM32F103: I2C Write Byte
In the previous guide (here), we took a look at the i2c protocol and how to use the i2c to scan for the slave…
Getting Started with STM32F103: UART Receiver with DMA and IDLE
In the previous guide (here), we took a look how to configure the UART to transmit and receive data to/from PC using DMA. The…
Getting Started with STM32F103: UART Receiver with DMA
In the previous guide (here), we took a look how to configure the UART to receive a character using interrupt and echo back the…
Getting Started with STM32F103: I2C Bus Scanner
n this guide, we shall discuss what is I2C and how to make an i2c bus scanner to scan the slave devices that connected…
Getting Started with STM32F103: Timer in encoder mode
In the previous guide of the timer in STM32F1(here), we took a look how to configure the timer to operate in Encoder mode, in…
Getting Started with STM32F103: Output Compare Mode in Timer
In the previous guide of timer (here), we took a look how to configure the timer in PWM mode. In this guide, we shall…
Getting Started with STM32F103: ADC Multi Channel Timer Triggered with DMA
In the previous guide (here), we took a look how to use ADC in DMA mode to acquire the data from two channels. In…