STM32 and Mongoose Web server Part 7:Over-The-Air Update
In this seventh part of the guide, we implement Mongoose OTA (Over-The-Air) firmware update functionality to allow the STM32 to receive and install new…
Mongoose
Using the Mongoose embedded networking library.
7 articles
Articles
STM32 and Mongoose Web server Part 6: NTP
In this sixth part of the guide, we configure the STM32 system to synchronize its internal time with an NTP server over the network.…
STM32 and Mongoose Web server Part 5: Linking UI to Peripherals
In this fifth part of the guide, we connect the web user interface to the STM32 hardware peripherals to enable real interaction with the…
STM32 and Mongoose Web server Part 4: Create Web UI
In this fourth part of the guide, we move beyond simple responses and begin building a basic web user interface that runs directly from…
STM32 and Mongoose Web server Part 3: Create Simple Server
In this third part of the guide, we implement a minimal HTTP server using Mongoose on STM32 to validate end-to-end web functionality. The server…
STM32 and Mongoose Web server Part 2: Configuration and Ping test
In this second part of the guide, we integrate the Mongoose source and header files into the STM32 project and walk through the required…
STM32 and Mongoose Web server Part1: Introduction and Hardware Setup
In this first part of the Mongoose guide for STM32, we focus on the foundational steps required to get the platform up and running,…