[Revised]Working with STM32 and sensors: DHT11
In this article, we shall look at the dth11 temperature and humidity sensor and how does it work and interface it with STM32F4 Nucleo-64…
Register-level programming
Direct peripheral-register programming; not inferred just from register descriptions.
237 articles · Page 3 of 24
Articles
Working with STM32 and Timers: Counting external clock
In this guide, we shall use external clock mode of timer in STM32 to count the external events and toggle the LED. (2 presses…
Getting Started with LvGL Part 3: Touch Integration
In the pervious guide (here), we have successfully integrated LCD. In part 3, we shall integrate the touch part of the LCD. 10. Touch…
Getting Started with LvGL Part 1: Introduction and environment setup
In this new guide series, we shall take a look at LvGL and develop driver to display LvGL and touch control. In this guide,…
Working with STM32 and Random Number Generator
In this guide, we shall take a look at what is random number and how the STM32 uses hardware to generate true random numbers…
Working with STM32F7 and SPI: Send data using DMA
In this guide, we shall send data over SPI bus using DMA. In the previous guide (here), we discussed how to send a single…
STM32 Advanced Peripherals : CANBus Part 3: Send and Receive Data
In the previous guide (here), we initialized the peripheral and filter to accept data with identifier of 0x446. In this third part of CANBus…
STM32 Advanced Peripherals : CANBus Part 2: CANBus Initialization
In part of the this guide series (here), we took a look at CANBus and it features, CANBus peripheral of STM32F446 and its feature.…
[Revised]Working with STM32 and SPI : Send bytes using DMA
In this revised version of SPI TX with DMA, we shall see how to transmit data over SPI using DMA. In the previous guide…
WS2812 With STM32 in SPI Mode
In the previous version of WS2812 Addressable LED, we used PWM with DMA to send the data to the addressable LED. In this guide,…