Getting Started with LIN (Local Interconnected Network) Part 2: Sending Data
In part 2 of LIN guide, we shall start transmitting data over LIN bus and decode them using either oscilloscope or logic analyzer. In…
521 articles · Page 16 of 53
In part 2 of LIN guide, we shall start transmitting data over LIN bus and decode them using either oscilloscope or logic analyzer. In…
In this guide, we shall take a look at the I2C bus and how to configure the i2c of STM32H5 using STM32CubeMX. In this…
In this multiple-part guide series on LIN (Local Interconnect Network) bus for STM32F4, I will cover its fundamentals and implementation. Part one will introduce…
In this guide, we shall see how to use micropython to read analog signal applied to analog pin of STM32F411 Nucleo-64. In this guide,…
In this guide, we shall see how configure a GPIO as input and read the GPIO pin state and toggle the LED with each…
After we have learnt how to compile and flash the board with micropython, in this guide, we shall use micropython to control on the…
In this guide, we shall see how to compile the micropython core for STM32F411 Nucleo-64 and burn the compiled version to the board. In…
In the second part of the ST7920 GLCD guide, we shall start the initialization sequence and display some strings and display pictures. In this…
In this guide, we shall see what is rotary encoder and how to use timer of the STM32H5 to read the pulses using hardware…
The ST7920-based 128×64 GLCD is a versatile graphical display commonly used in embedded systems for visualizing text and graphics. When interfaced with an STM32F4…