STM32 Timers Applications: Timer Synchronisation For 3-Phase PWM
Timer synchronization for three-phase PWM generation allows multiple timers to operate with precise phase shifts, typically 120° apart, to produce accurately timed PWM outputs. This…
Peripheral Drivers
483 articles · Page 9 of 49
Articles
Working with STM32 and E-Ink Display Part 2: Displaying Full Screen Color
Displaying a full-screen color image on an E-Ink display demonstrates the device’s ability to render rich visuals using its reflective, low-power technology. In this…
STM32 UART Part 8.2: 1- Wire DS18B20 Temperature Sensor: Read Temperature
In this part of the guide, we will bring together all the concepts learned so far to measure temperature from the DS18B20sensor using the 1-Wire protocol.…
Emulating I2C Sensors Part 6: Interrupt Driven Sample
In this part of the guide, the focus is on how the emulated sensor uses interrupts to inform the master about new data availability or status…
STM32 Timers Applications: Timer Synchronisation Trigger Mode
Timer synchronization on STM32 allows multiple timers to operate in a coordinated manner using trigger modes, enabling one timer to act as a master and…
SSD1331 Color OLED with STM32 Part 3: Draw Bitmaps
In this guide, we will demonstrate how to render images on the SSD1331 OLED display by sending bitmap data directly from a C array.Using…
STM32 UART Part 8.1: 1- Wire DS18B20 Temperature Sensor – Introduction and setup
In this two-part guide, we explore how to interface the DS18B20 temperature sensor with an STM32 microcontrollerusing the 1-Wire communication protocol. The first part introduces the fundamentals…
STM32 UART Part 7: 1- Wire Protocol Receiving Data
In this part, we dive into how the STM32 receives data from a 1-Wire sensor, interpreting the precise timing signals that represent logical bits. Understanding…
SPI Based Sensor Emulation Part 1: Introduction
In this guide, we demonstrate how to emulate an SPI-based sensor using two STM32 Nucleo-64 boards—one configured as the SPI master and the other…
STM32 UART Part 6: 1- Wire Protocol Sending Data
The 1-Wire protocol is a simple, low-speed communication standard developed by Dallas Semiconductor (Maxim) that uses just a single data line and ground for both power…