Getting Started with RS-485 and Modbus-RTU Part 1: Introduction and setup:
In this guide series, we shall take a look at RS-485 and Modbus-RTU and develop driver to communicate with RS-485 enabled device. In this…
Peripheral Drivers
483 articles · Page 21 of 49
Articles
Getting Started with STM32G0 and STM32CubeIDE : Internal RTC
In this guide on the internal RTC of STM32G0, we shall configure the RTC and display the time and date on the serial terminal.…
Getting Started with Embeetle IDE: Testing the IDE
In this guide, we shall see what is embeetleIDE and test it. In this guide, we shall cover the following: What is Embeetle IDE.…
Working with STM32 and I2S Part 4: CS43L22 Initialization and sound generation
In the previous guide (here), we were able to transmit data over I2S using DMA, in this guide, we shall initialize the CS43L22 which…
Getting Started with STM32G0 and STM32CubeIDE: DMA in Memory to Memory Mode
In this guide, we shall see how to configure the DMA to transfer data from one memory location to another without using the CPU.…
Working with STM32 and I2S Part 3: Sending Data using DMA
In the previous guide (here), we took a look how to configure the I2S and transmit data using poling mode. In this guide, we…
Getting Started with STM32G0 and STM32CubeIDE: SPI RX DMA
In the previous guide (here), we took a look how to transmit data over SPI bus using DMA. In this guide, we shall use…
Working with STM32 and I2S Part 2: Configuration and Sending Data
In the previous guide (here), we took a look what is I2S and how it works and it’s features. In this guide, we shall…
Getting Started with STM32G0 and STM32CubeIDE: SPI TX DMA
In the previous guide (here), we took a look at the SPI interface and how to configure the STM32G0 to communicate with SPI slave…
Working with STM32 and I2S Part 1 : Introduction
In this guide series, we shall cover the I2S peripheral of STM32F407 and its feature. In this guide, we shall covet the following: What…