Working with STM32 and internal RTC Part 2: Driver development
In the previous guide (here), we took a look at the feature of internal RTC of STM32F4. In this guide, we shall develop the…
Author: Husamuldeen
505 articles · Page 35 of 51
Articles
Working with STM32 and internal RTC Part 1: Introduction
In this guide, we shall see how the internal RTC of STM32F4 is working and what features it holds and in part2, we shall…
[Revised] Working with STM32 and RC522 RFID reader: SPI based module
In this article, we will took at the RFID and how it does work and use RC522 to read RFID tag and display the…
Getting Started with STM32F103: SPI (Serial Peripheral Interface)
In this guide, we shall discuss what is SPI and how transmit data over SPI. In this guide, we will cover the following: What…
[Revised ] Measuring The Rotation Speed Using STM32 and Timer in Encoder Mode
In the previous guide (here), we saw how to configure timer to work in encoder mode. In this guide, we shall take it step…
Getting Started with STM32F103: Pushing CPU to 72MHz
In this guide, we shall see how to configure the core of STM32F103 and make it to run at 72MHz which is the maximum…
Getting Started with STM32F103: Timer in PWM Mode with DMA
In the previous guide of PWM (here), we saw how to configure the timer to operate in PWM mode and update the duty cycle…
Getting Started with STM32F103: I2C Write Multiple Bytes
In the previous guide (here), we saw how to read three different register from a slave device (DS3231 RTC) and display the time stored…
Getting Started with STM32F103: I2C Read Multiple Bytes
In the pervious guid (here), we took a look how to write/read single byte using I2C and the slave device is DS3231 In this…
Getting Started with STM32F103: I2C Read Byte
In the previous guide (here), we took a look how to write a single byte with memory address to a slave device (DS3231) and…